Co-Polymeric Emulsion And Anti Termite Component For Multipurpose Constructional Uses.
Domestic ( Up to M20 ) and Commercial ( Above M20 ).
Moderately Aromatic Milky White Cohesive Low Viscosity Sticky Liquid.
Termite ( Normal or Hostile ) affected concrete and masonry / mortar work at any level of construction.
Other Key Features
Increases bond strength effectively. Also increases compressive, tensile and flexural strength, durability, toughness and chemical resistance. Makes concrete absolutely waterproofing too. Gives superior surface finish. Reduces rebound loss. Compatible with all varieties of cements.
Approx. 300 ml – 400 ml per sq. mtr. area as bond coat and 1.0 ltr per bag ( 50 kgs ) of cement as an admixture.
Instruction For Use
As Bond Coat – Mix dry fresh cement and dry fine sand [1:1 by volume]. Pour 2 – 3 parts of the said mixture gradually into 1 part of diluted Termoshield [1:2(water)] with continuous stirring in order to prepare bond coat. The said slurry must be laid over the affected surface immediately after preparation and the successive concrete or mortar also must be placed immediately within 30 minutes without fail.
As Admixture – 1.0 ltr of Termoshield must be mixed with 20 ltr – 24 ltr of water and the same should be used for preparing concrete or mortar of one bag (50 kgs) of cement.
As putty – A mixture of dry fresh cement and dry fine marble dust [1:1 by volume] must be poured gradually into diluted Termoshield [1:2(water)] with continuous mixing in order to prepare a dough like putty. The said putty must be used within 20 minutes without fail.
Termoshield also can be used as protective coating ( prepared from cement and sand ), as pour-able and inject-able grout or it can be applied by brush or spray directly ( without mixing cement or sand ) over the surface, especially in case of woods adjacent to concrete.
TAKE ALL GOOD CARE TO AVOID INHALATION OR INTAKE BY ANY HUMAN BEING. PREFERABLY USE MASK DURING USE OR APPLICATION OF TERMOSHIELD.
02 (two) years from the date of manufacturing.
Package & Pricing
|Unit||Retail Price For ( INDIA)||Shipper ( In Pcs.)|
Value For Money Factor
It costs only Rs. 12=92 per sq. ft. [ Considering 5 ltr pack size ] at it’s minimum dosage for using as bond coat and Rs. 430=80 per bag ( 50 kgs. ) of cement [ Considering 5 ltr pack size ] for using as admixture. The cost gets even reduced for bigger packs.