Elastomeric Properties Enriched Co-Polymeric Emulsion For Multipurpose Constructional Uses.
Domestic ( Up to M20 ) and Commercial ( Above M20 ).
Aromatic Milky White Cohesive Medium Viscosity Sticky Liquid.
All kinds of severe crack ( non moving ) or gap repairing at load bearing areas, DPC casting, salt peter action, treatment against damp patches, water seepage or leakage – especially in vertical and inclined surface, tile or stone slab fixing, grouting … etc.
Other Key Features
Increases bond strength in many folds. Also increases compressive, tensile and flexural strength, durability, toughness and chemical resistance. Makes concrete absolutely waterproofing. Gives superior surface finish. Reduces rebound loss. Compatible with all varieties of cements.
Approx. 150 ml – 200 ml per sq. mtr. area as bond coat and approx. 3.5 ltr per bag (50 kgs) of cement as an admixture.
Instruction For Use
To make bond coat – just add approx. 2 – 3 parts [by volume] of dry fresh cement to 1 part of diluted Molz [1:4(water)]. To use as admixture – prepare the concrete or mortar with diluted Molz [1:6(water)]. Pot life of Molz enriched slurry at 27 degree centigrade is approx 20 – 30 minutes.
02 (two) years from the date of manufacturing.
Package & Pricing
|Unit||Retail Price For ( INDIA )||Shipper ( In Pcs.)|
Value For Money Factor
It costs only Rs. 11=15 per sq. ft. [ Considering 5 ltr pack size ] at it’s minimum dosage for using as bond coat and Rs. 2,602=60 per bag ( 50 kgs. ) of cement [ Considering 5 ltr pack size ] for using as admixture. The cost gets even reduced for bigger packs.