GEL-E

Description

Epoxy Expansion Joint Sealant System.

Grade

Domestic, Commercial and Industrial.

Appearance

Two component pour-able thick sticky gels.

Ideal For

All kind of expansion joints as well as unpredictable uneven cracks.

Other Key Features

Very easy to use. No expert’s involvement is required as such for application. Excellent adhesion to almost all kind of surfaces. Extremely good chemical resistance. Permanently elastic. Normal cure time is 48 hours but it may vary depending on climate.

Dosage

Varies with climate. Average density is 1.45 kg / ltr (system).

Instruction For Use

All surfaces must be clean, dry and free from loosely adhering particles. Mild acidic surface cleaner can be used for surface preparation followed by electrical dryer application for making the same bone dry. Correct joint depth has to be established (maintaining width : depth ratio 2:1 or 1:1 depending on sites) by placing or inserting synthetic round foam filler tightly into the joint gap. Protect surfaces with masking tape. Two components are mixed in the ratio – Comp A : Comp B = 1:1 by weight with continuous stirring for 8 to 10 minutes until a smooth, even consistency is achieved. Pour the readily mixed sealant within 15 minutes after mixing along the expansion joint gap and allow it to get self leveled. Remove masking tape.

For sealing unpredictable uneven crack – cut a finger tip groove maintaining width : depth ratio 1:1 along the crack. Prepare surface, mix two components and seal the groove as per details given above.

Shelf Life

01 (one) year from the date of manufacturing.

Package & Pricing

UnitRetail Price For ( INDIA )Shipper ( In Pcs.)
A – 100 g177.0050
B – 100 g188.0050
A – 500 g774.0015
B – 500 g832.0015
A – 1 kg1508.0015
B – 1 kg1564.0015

 Value For Money Factor

The ultimate efficacy of this product ensures it’s value for money itself. The cost gets even reduced for bigger packs.

PDF Format

What's New