Anti-Corrosive Plasticizer And Waterproofing Admixture.
Domestic ( Up to M20 ), Commercial ( Above M20 ) and Industrial ( Above M20 ).
Aromatic Dark Brown Liquid.
Extremely corroded concrete, especially RCC and for the treatment of unevenly damaged concrete area caused by rust formation over reinforcement. Also may be used for new concreting or masonry / mortar work where scope of falling PH value of concrete is very high because of environmental pollution.
Other Key Features
Prevents severe corrosion. Improves structural strength. Makes concrete waterproofing. Gives superior surface finish. Reduces rebound loss. Reduces shrinkage cracks. Compatible with all varieties of cements and complies with IS 2645 : 2003 and IS 9103 : 1999.
100 ml – 500 ml per bag (50 kgs) of cement. Dosage should be finalized after initial site trials.
Instruction For Use
Make a dry mix of cement, stone chips and sand (or as appropriate) at right proportion. Add approx. 50% of required water and mix properly to make it perfectly moist. Shake well and add it (as per recommended dosage) into remaining water. Mix it well and use the same gradually to already moist concrete / mortar. Continue mixing for approx. 03 minutes to achieve cohesive mix. Normal curing is recommended.
05 (five) years from the date of manufacturing.
Package & Pricing
|Unit||Retail Price For ( INDIA )||Shipper ( In Pcs. )|
Value For Money Factor
It costs only Rs. 40=16 per bag ( 50 kgs ) of cement [ Considering 5 ltr pack size ] at it’s minimum dosage for domestic uses. The cost gets even reduced for bigger packs.