TERMOPROOF ADVANCED

Description

Co-Polymeric Emulsion And Anti Termite Component For Multipurpose Constructional Uses.

Grade

Domestic ( Up to M20 ), Commercial ( Above M20 ) and Industrial ( Above M20 ).

Appearance

Strongly Aromatic Milky White Cohesive Low Viscosity Sticky Liquid.

Ideal For

Termite ( Normal or Hostile ) affected concrete and masonry / mortar work at any level of construction.

Other Key Features

Increases bond strength effectively. Also increases compressive, tensile and flexural strength, durability, toughness and chemical resistance. Makes concrete absolutely waterproofing too. Gives superior surface finish. Reduces rebound loss. Compatible with all varieties of cements.

Dosage

Approx. 300 ml – 400 ml per sq. mtr. area as bond coat and 1.0 ltr per bag ( 50 kgs ) of cement as an admixture.

Instruction For Use

As Bond Coat – Mix dry fresh cement and dry fine sand [1:1 by volume]. Pour 2 – 3 parts of the said mixture gradually into 1 part of diluted Termoproof Advanced [1:2(water)] with continuous stirring in order to prepare bond coat. The said slurry must be laid over the affected surface immediately after preparation and the successive concrete or mortar also must be placed immediately within 30 minutes without fail.

As Admixture – 1.0 ltr of Termoproof Advanced must be mixed with 20 ltr – 24 ltr of water and the same should be used for preparing concrete or mortar of one bag (50 kgs) of cement.

As putty – A mixture of dry fresh cement and dry fine marble dust [1:1 by volume] must be poured gradually into diluted Termoproof Advanced [1:2(water)] with continuous mixing in order to prepare a dough like putty. The said putty must be used within 20 minutes without fail.

Termoproof Advanced also can be used as protective coating ( prepared from cement and sand ), as pour-able and inject-able grout or it can be applied by brush or spray directly ( without mixing cement or sand ) over the surface, especially in case of woods adjacent to concrete.

WARNING

TAKE ALL GOOD CARE TO AVOID INHALATION OR INTAKE BY ANY HUMAN BEING. PREFERABLY USE MASK DURING USE OR APPLICATION OF TERMOPROOF ADVANCED.

Shelf Life

02 (two) years from the date of manufacturing.

Package & Pricing

Unit Retail Price For ( INDIA ) Shipper ( In Pcs.)
100 ml 82.00 50
500 ml 318.00 15
1 ltr 587.00 15
2.5 ltr 1436.00 06
5 ltr 2738.00 03
10 ltr 5374.00 02
20 ltr 10706.00 01

Value For Money Factor

It costs only Rs. 16=43 per sq. ft. [ Considering 5 ltr pack size ] at it’s minimum dosage for using as bond coat and Rs. 547=60 per bag ( 50 kgs. ) of cement [ Considering 5 ltr pack size ] for using as admixture. The cost gets even reduced for bigger packs.

PDF Format

What's New